Water-cooling units with ice accumulator sections of the UAL series

Water-cooling units with ice accumulator sections of the UAL series

Designed to produce ice water.

Табы

Description

Purpose:

Designed to produce ice water used in various enterprises for cooling milk, beer wort and beer, beverages. They are monoblock products of full factory readiness.

Water-cooling units with ice storage sections based on hermetic and semi-hermetic reciprocating, scroll compressors manufactured by Copeland, Danfoss, Bitzer, Manurop and DORIN.

Technical Characteristics

Ice Accumulation Units
Installation name	Model of the ice accumulator	Accumulating capacity at ice thickness of 40 mm		Cooling capacity Q*, kW	Power consumption Pe**, kW
Installation name	Model of the ice accumulator	kWh	kg of ice	Cooling capacity Q*, kW	Power consumption Pe**, kW
UAL 750-1800	ALB-1800	164	1775	16,34	8,7
UAL 850-2100	ALB-2100	197	2130	19,64	10,7
UAL 860-2500	ALB-2500	230	2485	23,46	12,5
UAL 860-2800	ALB-2800	263	2840	23,46	12,5
UAL 1500-3200	ALB-3200	295	3195	25,85	13,7
UAL 2000-3500	ALB-3500	328	3550	30,07	15,4
UAL 2200-3900	ALB-3900	361	3905	33,06	20,7
UAL 2400-4200	ALB-4200	394	4260	36,85	22,8
UAL 2500-4600	ALB-4600	427	4615	38,15	23,0
UAL 3000-5000	ALB-5000	460	4970	43,14	22,1
UAL 3200-5300	ALB – 5300	492	5325	46,45	22,5
UAL 3400-5700	ALB – 5700	525	5680	51,42	25,6

* Q - The cooling capacity of the unit is indicated, at the Tboil. = -10°C and Tcond.= +45°C, overcooling of the liquid 5°C and overheating of the intake gas 5...10°C, freon R-22.
** Re- The power consumption of the unit is indicated, at the Tboil. = -10° C and Tcond.= +45°C, overcooling of the liquid 5°C and overheating of the intake gas 5...10°C, freon R-22.
D - diameter of the discharge pipeline
L1 - diameter of the liquid pipeline condenser receiver
L2 - diameter of the liquid pipeline receiver - evaporator
S is the diameter of the suction pipe

Attention!
The water temperature at the outlet of the ice accumulator is +0.5...+2°C.

Features and advantages

Standard equipment of a water-cooling unit with an ice accumulator:

1. Compressor-receiver unit consisting of:

Metal frame (dyed)
Compressor with shut-off valves on discharge and suction
Compressor crankcase heating THE
Thermal protection of the compressor motor
Mechanical lubrication control relay on compressors
Liquid receiver with safety valve and shut-off valves at the inlet and outlet
Dual pressure switch
Glycerin pressure gauges of high and low pressure
Filter dryer on the liquid line
Sight glass on the liquid line
Shut-off valve on the liquid line
Solenoid valve
Vibration isolators on injection and suction
Unit control cabinet (in metal box)

2. Air condenser
3. Ice accumulator consisting of:

Evaporation section with supporting frame and refrigerant distributor
Insulated tank with lid
Electric control panel for ice freezing and bubbling system (blower)
Ice thickness sensors - 2 pcs.
Bubbling system (blower)
Compressed air distribution pipeline
Incoming water flow distributor

4. A set of technical documentation (passport, warranty card, hydraulic and electric scheme)